Our 4ml Vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The specifications are international common standards, which are fully compatible with the autosamplers of Aijiren, Worcester, Shimadzu and Aijiren Tech.
There are generally several booths linked together (Figure 15-2), and the vials are delivered to the inspectors by the conveyor. The vials travel down the conveyor and stop for the set inspection time. The inspector picks up the vials, performs the inspection in the lighted booth, and places the vials back onto the conveyer to proceed to
Jan 26, 2022 · 10-dose vial: 5 ml of solution in a 10-dose vial (clear type I glass) with a halobutyl rubber stopper and an aluminium overseal with a plastic flip-off cap. Pack sizes of 10 multidose vials. 8
The cup is graduated to 180 mL and its durable, break-resistant design is still flexible enough for squeezing on sides to direct pour off for convenient specimen transfer into transport vial. This cup is commonly used for collections involving substance abuse testing. Part number 74850 is inner packed 25 cups per sleeve.
Precision cell vial thawing systems and solutions. The ThawSTAR Thawing System replaces non-standardized manual methods of thawing samples with controlled profile thawing and can be leveraged early in the R&D phase and scaled into commercial manufacturing and point of care. Several factors including cell size and choice of cryopreservation
white graduation line autosampler sample vials precision-formed neck 12 Ml Sample Vials at Thomas Scientific tablet to save lab prep time and expense A pre-measured fill line and an accurate 100 mL graduation makes sample collection easy and meets EPA requirements . crimp neck vial with writing space for chromatography-Aijiren
With the demand for better product stability and performance in glass, septa and caps, we developed Verex HPLC / GC vial products with high quality materials to. Vials -.:: Alovie Technologies ::. 1) HPLC / Autosampler Vials, Caps & Septas 8mm, 9mm, 11mm, 13mm,Vials Rack, 13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample.
White enamel graduations with a graduation interval of 5mL and a tolerance of +/- 4mL; features a PYREX® No. 27 standard taper stopper Non-sterile and reusable; useful as a mixing cylinder Supplied without a bumper guard; this is the suggested replacement for Corning® Item Numbers 2983-500 and 2984-500
Using either thawing method, vials must reach room temperature before dilution and must be diluted within 2 hours Step 2: Invert Before dilution invert vaccine vial gently 10 times Do not shake Inspect the liquid in the vial prior to dilution. The liquid is a white to off-white suspension and may contain white to off-white opaque
Vial choices include: Crimp Top, Snap Top, and Screw top vials with a selection of closures. Refer to the Autosampler Compatibility Table on pages 12-13 to determine which vials, closures and inserts will work on your specific autosampler unit.
to fill vials (using sterile laminar flow hood or a biological safety hood), Quest will accept 2 mL to 3 mL sterile PBS or sterile saline (0.85% or 0.9%) provided the vial filling process below is followed Vial filling process: • Note: Add the VTM, PBS, or saline in the sterile container before collecting the patient sample
Type: PP micro-vial, Transparent: PP micro-vial, Amber: PP micro-vial: PP micro-vial, Transparent: PP micro-vial, Amber: Write on spot: . : : : : Min. Vol / uL: 30: 30: 150: 200: 200: Max. Vol / uL: 300: 300: 750: 1.5 mL: 1.5 mL: Dimension: 32 x 12mm: 32 x 12mm: 32 x 12mm: 32 x 12mm: 32 x 12mm: Size: ND 9, wide opening: ND 9, wide opening: ND 9, wide opening: ND 9, wide opening: ND 9, wide opening: Qty: 100: 100
Multidose Vial Preparation 30 March 2021 OFFICIAL Purpose: This document explains the process of preparing dose syringes from the COVID-19 AstraZeneca multi-dose vials (MDV). This includes the presentation of the vaccine, preparing your workstation, gathering equipment and step-by-step directions accompanied by photographs.
Haloperidol decanoate, USP is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of haloperidol decanoate 50 mg (base)/mL for IM injection contains 50 mg haloperidol (present as haloperidol decanoate 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.
A Step-by-Step Guide Step 1: Carefully remove the cap from the needle. Step 2: Insert the needle into the Vetsulin® vial. Step 3: Turn the vial and syringe upside down. Step 4: ®Making sure the tip of the needle is in the Vetsulin, withdraw the correct dose into the syringe.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack