VWR® 11mm CRIMP-TOP VIALS AND INSERTS – STANDARD OPENING VWR® 11mm CRIMP-TOP VIALS AND INSERTS – WIDE OPENING Description Glass Patched Dimensions, mm Profile Total Volume Usable Volume Residual Volume, µL Pk Cat. No. 11 mm Crimp-Top Vial, Wide Opening Clear No 12 x 32 Flat Bottom 2 ml 1,5 ml <100 1000 548-0003
Polyethylene Vials with Caps. SPEX SamplePrep. slip-on cap. Volume 35 mL; mixing load approximately 15 mL. For use with SPEX SamplePrep 3112 or 8006A methacrylate balls. Polypropylene Vial w/Cap 1.5x3 in.: For wet or dry mixing. Vial size 11/2 in. (3.81 cm) diameter x 3 in. (7.62 cm) long. Polyethylene vial with attached cap.
4 mL Screw Top Vials, Caps and Septa. Screw top vial, 4 mL wash vials with fill markings and cap (no septa), 25/pk. Vial size: 15 x 45 mm (13-425 cap)
Vial Size, 15 x 45 mm. vialStyle, Screw Top. Vial Type, Waste and Wash. Volume Capacity, 4 mL JG Finneran Borosilicate Glass Dram Sample Vial. JG Finneran Borosilicate Glass Dram Sample Vial with Solid Top Cap and PTFE/F217 Septa, Clear, 1 Dram Capacity, 15mm Diameter x 45mm Height (Case Sample Vials and Accessories
Aluminium is an alternative material to the plastic used in most screw closures for laboratory bottles. The caps are available as a closed-top cap with a high temperature PTFE coated cap liner, or as an open-topped cap for use with septum or stopper. Metal closures offer a wide range of temperature tolerances and have a high mechanical strength.
Catalog number: C246-0040. Aijiren Tech™ Amber VOA Glass Vials with Closed-Top Cap are designed for EPA volatile organic analysis (VOA) when a pierceable septa closure is not needed. Available Certified to meet EPA Performance Based Specifications for Volatile Organic Analysis, Processed the same way as the certified vials but without
Vials for Aijiren Technology ® 96-position carousel, 8 x 40 mm, volume 1 mL, clear glass vial, conical bottom, closure type, crimp top vial, pkg of 125 ea Expand View Pricing
We produce two main designs of flow meters: Laboratory Meterate Tubes : Water 0.039 - 0.39cc/min to 114.2 - 1142cc/min or Air 3.4 - 34cc/min to 300 - 60,000cc/min. Industrial SCR Tubes : Water 2.5 gal-33 gal/hour to 0.2 - 2.5 L/min or Air 15 - 100 L/min to 1 - 7 cu ft/min. For bespoke glass enquiries, please send your drawings to us (email to
Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 4 mL, clear glass vial, O.D. x H 15 mm x 45 mm, thread 13-425) are used on many
Feb 08, 2017 · Plastic lids for Mobil engine oil bottle. Plastic lids for mobil engine oil bottle-various kinds of plastic screw caps for drums, pails, buckets, cans, bottles, and pipes. Diameter 25mm- 300 mm.Customized logos available. HDPE, PE, PP, PE, the cap of a bottle or jar which screws onto the threaded lip of the container.
Aug 12, 2008 · Fill high-sensitivity 50 mL autosampler glass vial with zero water and place it to S1 tray position. Remove tray cover or make sure it's in the correct position. Each vial in the autosampler tray must be filled to the top and covered immediately with wax paper or sealed with special caps to prevent CO 2 penetration.
15 x 45mm 1 dram (4ml) Clear Borosilicate Glass Vial with 13-425 Black Phenolic PolyCone Lined Cap attached, Vacuum & Ionized. Qorpak's pre-cleaned screw thread vial kits offer the ultimate in convenience. These clear (flint) glass vials are made from Type I borosilicate glass, the standard for quality lab quality.
Glass Vials (4) Globe Scientific Inc (21) KSE Scientific (15) Kemtech America Inc (9) LaMotte Company (1) Labconco Corporation (Research) (1) MilliporeSigma Supelco (3) National Scientific Supply Company, Inc (7)
Save To List. Add To Cart. Amber vial designed for volatile organic analysis (VOA); recommended for light sensitive analytes. Closed top cap for methods where pierceable septa is not required. Closed top white polypropylene cap bonded with a PTFE-faced silicone liner for a secure seal. Choose from 20mL or 40mL sizes.
Polypropylene or glass Cap finish is 15 mm Shell vials are designed for use with autosamplers that require 15 x 45 mm vials. Vials are are available in clear glass or natural polypropylene. 1234Q06 has a limited volume of 3 mL with other vials having a capacity of 4 mL.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack