DUO Set 2 ml / 4ml. Indications for Use: For the application of Tisseel Fibrin Sealant. For single use only. Not made with natural rubber latex. Do not reuse or resterilize. Sterilized by gamma radiation. Sterile and non-pyrogenic in unopened and undamaged package. Rx only. Lot No: Exp. Date: REF. BE-90-01-040. Manufactured for: Baxter
7522-VC20101 20mm,CrimpTread20mLClear Vial,75x22.5mm, Rounded Bottom, Borosilicate Soft White PE Pack 100/pk 7522-VC20101A 20mm, Crimp Tread 20 mL Amber Vial, 75x22.5mm, Rounded Bottom, Borosilicate Soft White PE Pack 100/pk 4622-VC20201 20mm,CrimpTread10mLClear Vial,46x22.5mm, Flat Bottom, Borosilicate Soft White PE Pack 100/pk
vials differently, due to different choices of volume at which a vial is considered full. However, the dimensions of the vials are the same. You can buy autosampler vials from CRS with confi-dence; simply check the vial / autosampler cross-reference chart on pages 126 - 127 to get the right vial for your instrument.
solvents for liquid mixing of the solvent-borne rGO sheets and CNT, and the NR matrix, was carried out for THF, toluene, n-hexane, p-xylene, dichloromethane, and chloroform as 5 vol % NR solutions. Two up-scaled separate master batches of dissolved rubber were prepared by addition of 50 mL of NR to
Pricing. 27167. PTFE/red rubber, diam. × thickness 16 mm × 0.060 in., for use with 15 mL vial. Pricing. 27178. PTFE/red rubber, diam. × thickness 18 mm × 0.050 in., for use with 22 mL vial, pkg of 100 ea. Pricing.
All Zinsser glass vials have the Zinsser Analytic logo printed on them as a mark of a genuine vial. The vials are available in 1.5, 4 & 8ml volume. 0.2ml glass inserts (Qualytips) are available for the 1.5ml Qualyvials®. Siliconised Qualyvials® are available in 4ml. For closing the vials, there is a selection of screw caps with solid or open top.
NDC 51662-1450-1 ADENOSINE INJECTION, USP 12mg/4mL (3mg/mL) 4mL VIAL HF Acquisition Co LLC, DBA HealthFirst Mukilteo, WA 98275 Also supplied in the following manufacture supplied dosage formsAdenosine Injection, USP is supplied as a sterile, non-pyrogenic solution in normal saline.Store at 20° to 25°C (68° to 77°F) [see USP Controlled Room
Wheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Lined Cap)4 mL Economy Vial, Glass Amber, 13-425 Cap, Rubber. These economically priced sample vials are conveniently packed in two shrink-wrapped
Aijiren Tech Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
Vial Kit: 12 x 32 mm Clear Glass, Wide Mouth Screw Top Vials 2.0 ml, Red PTFE/Natural Rubber Liner Installed into the 9 mm Black Poly Cap Part Number: 60180-223 Qty/Pk: 100
Wheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Lined Cap)4 mL Economy Vial, Glass Amber, 13-425 Cap, Rubber. These economically priced sample vials are conveniently packed in two shrink-wrapped
Vials and Closures Thermo Scientifi c Chromatography Columns and Consumables 2014-2015 2-056 Septum Selection Guide Septa for use with general chromatography vials, liquid injection PTFE/Natural Red Rubber PTFE Natural Red Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple
Aijiren Tech Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
Chromatography Laboratory for Testing HPLC Vials. The 10mm screw neck autosampler vial produced by Aijiren is produced with borosilicate hydrochloric acid glass and is often used in autosampler. The flat bottom is very suitable for placing in the sample tray, and the Cap has a center hole for easy sample injection.
13-425 A utosam pler Vials & Closures 4mL vials are widely used in compound storage as well as for chromatography sample vials. 4mL vials are compatible with 13-425 screw thread closures. PTFE/Silicone septa are most popular for HPLC applications, and pre-slit septa are easier to pierce with needles.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack