Minimal bench space, Use 20/30/40ml scintillation vials. 1.6ml Eppendorf tubes, 4ml/1 dram vials, 16x100mm test tubes, With a small 8 in. x 12 in. footprint and only 18 in. high. The Centrifan PE is self-contained, requires
2.0ml screw cap vials molded from high precision mold and high purity resin. Screw caps deliver leak-proof seal for all types of contents, ideal for life science reagent or solution. All vials are available in skirted and conical interiors to allow full recovery of samples stored. Caps and vials
Low evaporation Nylon filter vials for sale separa-HPLC Vials Supplier. Mob: 8618057059123. market@aijirenvial.com. Home. Products. 1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials HPLC Syringe Filters.
It is equipped with a polypropylene cap with an open top and a PTFE/silicone low-leakage gasket bonded to the cap. The level 1 vials have been assembled and quality checked before leaving the factory. Rated 4.9 /5 based on 532 customer reviews. 24mm screw glass vial 24mm screw neck cap 24mm screw vial 40ml clear glass vial 40ml glass vial 40ml
Package Of 4ml Vials. Glass autosampler vial, 4ml, 15mm x 45mm, with 13-425 screw cap. Ideal for general laboratory use and sample storage. Chemically inert caps suitable for most chromatography and storage applications. The finest PTFE/silicon septum used for cleanliness. 4ml 13mm Screw Top Glass Vial for PERKINELMER.
Target Snap-It Glass Vials. Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.
Wheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Lined Cap)4 mL Economy Vial, Glass Amber, 13-425 Cap, Rubber. These economically priced sample vials are conveniently packed in two shrink-wrapped
9mm autosampler vials, clear, with screw caps & septa. Standard GC, HPLC sample vial, small caliber, 8-425 standard threaded mouth, can be used for autosampler and sample storage. It can be used with 8-425 screw cap septum. 8-425 Autosampler Vial, often used in conjunction with Shimadzu, Spectrophysics, Varian, and other autosamplers.
Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10
Sealed Sterile Serum Vials. Sealed Sterile Serum Vials. Grid List. Sale. 100 Pack 9-425 Autosampler Vials & 100 Pack 0.1mL Glass Vial Inserts B08R1LJWTB. $179.92. Features: 2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high chemical resistance.It is suitable for
screw thread HPLC glass vials evaporation-proof seal Latest updates of vial crimper supplier,manufacturer and factory 9 mm Wide Mouth Screw Thread Vials for HPLC and GC – Chrom Tech The 9 mm wide 12x32mm brown glass chromatography glass vials evaporation-proof seal.
Crimp caps squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For few samples, manual crimper tools are the best choice.
evaporation-proof seal chromatography 4ml vials specification GUIDELINES FOR AUTOSAMPLER VIAL SELECTION All the seals, caps, septa and inserts will be located on the corresponding Polypropylene vials are often used for ion chromatography because of the ̷
Heat Transfer – a Wheaton Glass serum vial, as opposed to glass serum bottles, plastic serum bottles, and other containers has a very consistent thin wall and bottom. This attribute of a Wheaton glass serum vials allow the heating phase of the lyophilization process to take place rapidly and effectively.
This glass dilution vial in a Lab File™ is especially suited for research studies. The vial is marked with a blue line at the 3mL level and can be sterilized and stored at low temperatures. Vial comes with a pre-attached solid-top black phenolic screw cap with 14B rubber liner. Vials are packaged in corrugated trays with partitions. Manufactured from Wheaton-33® low extractable borosilicate
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack